ADIY
A7670C 4G Breakout BoardFIG. 01

GSM Modules

ADIY GSM SIMA7670C 4G BREAKOUT BOARD (Ver 1.1)

A7670C 4G Development Board A7670C 4G Development Board is a high-performance Cat-1 module that supports LTE-TDD/LTE-FDD wireless communication modes. With a maximum downlink rate of 10Mbps and an uplink rate of 5Mbps,…

₹1,200₹2,000incl. GST · price as listed

In stock (as listed)

Overview

A7670C 4G Development Board#

A7670C 4G Development Board is a high-performance Cat-1 module that supports LTE-TDD/LTE-FDD wireless communication modes. With a maximum downlink rate of 10Mbps and an uplink rate of 5Mbps, it ensures reliable and fast data transfer. Featuring a serial interface based on the SIMCOM A7670C LTE modem, this board allows for easy communication with computers or laptops via a USB to Serial adapter or TTL converter. Control and configure the module using AT commands for efficient and effective development.

Features: A7670C 4G Breakout Board#

  • Input Supply: 3.4 to 4.2 DC(typical 3.8V)
  • It supports drivers such as Microsoft Windows 7/8/10, Linux, Android
  • DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
  • Power consumption: 300mA(MAX); <10mA (sleep mode)
  • Support 4G only
  • SIM com A7670C 4G LTE chip on-board

A7670C module 4G Breakout Board is designed keeping in mind the requirements of the user. It has various pin-outs from the module, such as RING – used to detect incoming call, DTR – to use the 4G Module in ultra-low power sleep mode, NETLIGHT – in case developer wants to use external LED to indicate network status, RESET – developer can use this pin to connect with MCU and reset the module if required. Apart from this, the module also has pin-outs for connection of Speaker, Microphone.

A7670C 4G Breakout Board supports wireless communication modes of LTE-TDD/LTE-FDD. It supports maximum 10Mbps downlink rate and 5Mbps uplink rate. The A7670 series adopts LGA form factor and is compatible with SIM7000/SIM7070 series, The A7670 series supports multiple built-in network protocols, supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible with SIM7500/SIM7600 series modules. Meanwhile the A7670 series integrates main industrial standards. Interfaces, with powerful expansibility, including abundant interfaces such as UART

This SIM A7670C 4G breakout Board has a UFL connector, which allows connection of any antenna with this board. Apart from this, the module is very compact in size. It can be easily embedded in any customized PCB.

The SIM A7670C 4G Breakout Board supports multiple built-in network protocols like HTTP, HTTPS, FTP, FTPS etc., supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible withSIM7500/SIM7600 series modules.

Specifications: A7670C 4G Breakout Board#

  • Supply Voltage – 3.4V to 4.2V
  • Power Consumption – 2-3 Amp
  • Frequency band supports– GSM 900/1800 MHz, LTE-FDD and LTE-TDD.
  • Data Transfer – LTE (mbps) – 10 Downlink, 5 Uplink
  • GPRS (kbps) – 236.8 Downlink, 236.8 Uplink
  • Protocol – TCP/IP/IPV4/IPV6/Multi PDP/FTP/FTDS/HTTP/DNS
  • SIM card supports 1.8 ~ 3.0V

Applications: A7670C 4G Breakout Board#

  • IoT applications
  • Telematics
  • Surveillance Devices
  • POS, Industrial Routers
  • Remote Diagnostic

Features: A7670C module#

1. Power supply VBAT: 3.4V ~4.2V(Recommended VBAT: 3.8V)

2. Power saving Current in sleep mode:<2.5mA

3. Data Transmission Throughput

4. SMS

  • a) MT, MO, CB, Text, PDU mode
  • b) Short Message(SMS) storage device: USIM Card, CB does not support saving in SIM Card Support CS domain and PS domain SMS
  • c) USIM interface Support identity card: 1.8V/ 3V
  • d) USIM application support SAT class 3, GSM 11.14 Release 98 Support USAT
  • e) Support phonebook types: SM/FD/ON/AP/SDN

5. Audio feature:

  • a) PCM Digital Audio Interface
  • b) Analog audio MIC input interface
  • c) Analog audio SPK output interface

6. Suitable for LTE networks.
7. Control via AT commands.
8. Power LED and Network Status LED
9. Powerful TCP/IP protocol stack for internet data transfer
10.U.FL male connector for external antenna

Features

  • It supports drivers such as Microsoft Windows 7/8/10, Linux, Android
  • Support 4G only
  • SIM com A7670C 4G LTE chip on-board
  • Supply Voltage – 3.4V to 4.2V
  • Power Consumption – 2-3 Amp
  • Frequency band supports– GSM 900/1800 MHz, LTE-FDD and LTE-TDD.
  • Data Transfer – LTE (mbps) – 10 Downlink, 5 Uplink
  • GPRS (kbps) – 236.8 Downlink, 236.8 Uplink
  • Protocol – TCP/IP/IPV4/IPV6/Multi PDP/FTP/FTDS/HTTP/DNS
  • SIM card supports 1.8 ~ 3.0V
  • IoT applications
  • Telematics
  • Surveillance Devices
  • POS, Industrial Routers
  • Remote Diagnostic
  • a) MT, MO, CB, Text, PDU mode
  • d) USIM application support SAT class 3, GSM 11.14 Release 98 Support USAT
  • a) PCM Digital Audio Interface
  • b) Analog audio MIC input interface
  • c) Analog audio SPK output interface

Technical specifications

Specifications for ADIY GSM SIMA7670C 4G BREAKOUT BOARD (Ver 1.1)
Input Supply3.4 to 4.2 DC(typical 3.8V)
DATA Transfer LTE(Mbps)10 Downlink / 5 Uplink
Power consumption300mA(MAX); <10mA (sleep mode)
b) Short Message(SMS) storage deviceUSIM Card, CB does not support saving in SIM Card Support CS domain and PS domain SMS
c) USIM interface Support identity card1.8V/ 3V
e) Support phonebook typesSM/FD/ON/AP/SDN

Specifications are taken from the product listing. See the datasheet for full electrical details.

Pin configuration

A7670C module V1.1_Pin diagram

Datasheets & downloads

  • ADIY GSM SIMA7670C 4G Breakout Board with logic level V1.2 – view 1

    GSM Modules

    ADIY GSM SIMA7670C 4G Breakout Board with logic level V1.2

    The SIM A7670C 4G LTE breakout Board is a Cat 1 module that supports wireless communication modes of LTE-TDD/LTE-FDD/GSM/GPRS/EDGE. It supports a maximum 10Mbps downlink rate and a 5Mbps uplink rate It supports a…

    ₹1,425

  • GSM Module 4G SIM7670C

    GSM Modules

    ADIY GSM SIMA7670C 4G Module with RS232

    GSM Module/4G LTE modem with SIM card socket, SMA antenna connector, DC power jack, and an RS232 interface supports wireless communication modes of LTE-TDD/LTE-FDD/GSM/GPRS/EDGE. Suitable for LTE and GSM networks. This…

    ₹1,385

    Datasheet
  • A7670E 4G/2G Breakout Board module

    GSM Modules

    ADIY GSM SIMA7670E 4G/2G Breakout Board

    SIMA7670E 2G/4G Breakout Board module supports wireless communication modes of LTE-FDD/GSM/GPRS/EDGE GSM/GPRS. It supports a maximum 10Mbps downlink rate and a 5Mbps uplink rate. The ADIY SIM_A7670E is compatible with…

    ₹1,438

    Datasheet
  • ADIY N58 LTE GNSS Bluetooth Evaluation Board – view 1

    GSM Modules

    ADIY N58 LTE GNSS Bluetooth Evaluation Board

    N58 LTE GNSS Bluetooth Evaluation Board – ADIY NEOWAY N58 is ideal solution for M2M and IoT applications N58 is an industrial LTE module that is developed based on the UNISOC UIS8910DM platform. This module supports…

    ₹2,417

    Datasheet