ADIY
ADIY-SIM800C moduleFIG. 01

GSM Modules

SIM800C LM39302 TTL Board

SIM800C is a Quad-Band GSM/GPRS module in an LCC type that supports GPRS up to 85.6kbps data transfer. It has strong extension capability with abundant interfaces including UART, USB2.0, GPIO, etc. The module provides…

₹1,002₹1,225incl. GST · price as listed

In stock (as listed)

Overview

SIM800C is a Quad-Band GSM/GPRS module in an LCC type that supports GPRS up to 85.6kbps data transfer. It has strong extension capability with abundant interfaces including UART, USB2.0, GPIO, etc. The module provides much flexibility and ease of integration for customer’s applications. Few of its advantages are as follows

  • Small-size quad-band GSM/GPRS module
  • LCC form factor, easy for solder
  • Abundant software functions: DTMF, MMS, MUX
  • Low Power consumption
  • Embedded TCP/UDP protocols

SIM 800C 2G GSM Modem with SMA Antenna#

This is ADIY SIM 800C 2G GSM Modem with SMA Antenna, The baud rate range of the GSM Module can be easily configured using AT commands, allowing you to set it anywhere between 9600 and 115200. This versatile GSM GPRS Modem incorporates an internal TCP/IP stack, enabling seamless internet connectivity through GPRS. Its capabilities make it a perfect choice for M2M interface applications that involve SMS, voice, and data transfer.

Features of SIM 800C GSM Modem

  • Quad-Band GSM/GPRS engine operating on frequencies from 850 MHz to 1900 MHz.
  • RS232 interface for direct communication with computers or MCU kits.
  • Configurable baud rate ranging from 9600 to 115200.
  • Onboard regulated power supply compatible with a wide range of power sources.
  • Capable of making audio calls, sending/receiving SMS, reading SMS, and accessing the internet.
  • Equipped with a robust high-current low dropout linear voltage regulator

ADIY SIM800C LM39302 TTL BOARD is built with the Quad-Band GSM/GPRS engine-SIM800C and works on frequencies 850/900/1800/1900MHz. LM39302R-ADJ 3.0A is a low-dropout linear voltage regulator that provides a low-voltage, high-current output with a minimum of external components.

The baud rate is configurable through the AT command. The GSM/GPRS modem has an internal TCP/IP stack to enable you to connect with the internet via GPRS. This module is suitable for SMS, Voice as well as DATA transfer applications in the M2M interface. The onboard Regulated Power supply allows you to connect a wide range of unregulated power supplies. Using this modem, you can make audio calls, SMS, Read SMS, attend the incoming calls and the internet, etc., through a simple AT command.

One of the standout features of this modem is its onboard regulated power supply, which offers compatibility with a wide range of unregulated power sources. This means you can connect the modem to various power inputs without any hassle. With this modem at your disposal, you can effortlessly perform numerous tasks such as making audio calls, sending and receiving SMS, reading SMS, and accessing the internet using simple AT commands.

The modem utilizes the highly reliable Quad-Band GSM/GPRS engine SIM800C, manufactured by SIMCOM, which operates on frequencies ranging from 850 MHz to 1900 MHz. To establish a direct connection with a computer or any other RS232 compatible devices, the modem features a convenient DB9 female connector. The necessary RS232 level conversion is seamlessly achieved through the use of the reliable MAX3232 module from MAXIM Semiconductor.

To power the modem, a 5-12V DC power supply is required. To effectively handle situations where high surge currents (up to 2A) may be encountered, the modem is equipped with a robust high current low dropout linear voltage regulator.

Connection Details:#

The module has to be powered through the onboard DC jack with an input voltage between 9-12V The module can be connected to the microcontroller via the onboard UART or I2C pins. The module also contains an onboard RS232 connector, to connect to other devices via RS232 protocol.

<table style="width: 535px;"><tbody><tr><td style="width: 225.403px;"><span style="color: #000000;">Micro-controller</span></td><td style="width: 292.597px;"><span style="color: #000000;">SIM800C</span></td></tr><tr><td style="width: 225.403px;"><span style="color: #000000;">5V</span></td><td style="width: 292.597px;"><span style="color: #000000;">VCC (not required if powered externally)</span></td></tr><tr><td style="width: 225.403px;"><span style="color: #000000;">GND</span></td><td style="width: 292.597px;"><span style="color: #000000;">GND</span></td></tr><tr><td style="width: 225.403px;"><span style="color: #000000;">Tx</span></td><td style="width: 292.597px;"><span style="color: #000000;">Rx</span></td></tr><tr><td style="width: 225.403px;"><span style="color: #000000;">Rx</span></td><td style="width: 292.597px;"><span style="color: #000000;">Tx</span></td></tr></tbody></table>

Pin Description:#

  • VCC: Input range is 5-20V

  • GND: power supply ground

  • TXD: send pin serial port module.

  • RTS: Request to send

  • CTS: Clear to send

  • BT_A: BLE Antenna

  • RF_S: RF_Sync

  • ADC: Analog-to-digital Convertor

  • STAT: Status

  • RXD: receive pin serial port module.

  • SPKP: Speaker pin (+)

  • SPKN: Speaker pin(-)

  • MICN: Mic pin (-)

  • MICP: Mic pin (+)

  • RI: Ring core pin tips

Features:#

  • Quad-Band GSM/GPRS 850/900/1800/1900MHz.

  • Configurable Baud Rate.

  • Power controlled using LM39302 IC.

  • ESD Compliance.

  • Enable MIC and Speaker socket.

  • push-push Nano sim card holder.

  • With UFL and SMA connector Antennas.

  • Input Voltage: 5-20V.

Applications:#

  • Industrial automation.

  • GPRS-based data logging.

  • GPRS and BLE application.

  • Home automation.

  • Health monitoring.

  • Agriculture automation.

  • Vehicle tracking.

  • Remote monitoring and controlling.

  • GPRS based on Weather report logging.

  • GSM GPRS-based Security alert.

  • GPRS-based remote terminal for file transfer.

  • Bulk SMS sending.

Resources:#

Sim800C guides

DataSheet

Features

  • Small-size quad-band GSM/GPRS module
  • LCC form factor, easy for solder
  • Low Power consumption
  • Embedded TCP/UDP protocols
  • Quad-Band GSM/GPRS engine operating on frequencies from 850 MHz to 1900 MHz.
  • RS232 interface for direct communication with computers or MCU kits.
  • Configurable baud rate ranging from 9600 to 115200.
  • Onboard regulated power supply compatible with a wide range of power sources.
  • Capable of making audio calls, sending/receiving SMS, reading SMS, and accessing the internet.
  • Equipped with a robust high-current low dropout linear voltage regulator
  • BT_A: BLE Antenna
  • RF_S: RF_Sync
  • Quad-Band GSM/GPRS 850/900/1800/1900MHz.
  • Configurable Baud Rate.
  • Power controlled using LM39302 IC.
  • ESD Compliance.
  • Enable MIC and Speaker socket.
  • push-push Nano sim card holder.
  • With UFL and SMA connector Antennas.
  • Industrial automation.
  • GPRS-based data logging.
  • GPRS and BLE application.
  • Home automation.
  • Health monitoring.

Technical specifications

Specifications for SIM800C LM39302 TTL Board
Abundant software functionsDTMF, MMS, MUX
VCCInput range is 5-20V
GNDpower supply ground
TXDsend pin serial port module.
RTSRequest to send
CTSClear to send
ADCAnalog-to-digital Convertor
STATStatus
RXDreceive pin serial port module.
SPKPSpeaker pin (+)
SPKNSpeaker pin(-)
MICNMic pin (-)
MICPMic pin (+)
RIRing core pin tips
Input Voltage5-20V.
Micro-controllerSIM800C
5VVCC (not required if powered externally)
GNDGND
TxRx
RxTx

Specifications are taken from the product listing. See the datasheet for full electrical details.

Pin configuration

SIM800C Module - Pin configuration

Datasheets & downloads

  • ADIY GSM SIMA7670C 4G Breakout Board with logic level V1.2 – view 1

    GSM Modules

    ADIY GSM SIMA7670C 4G Breakout Board with logic level V1.2

    The SIM A7670C 4G LTE breakout Board is a Cat 1 module that supports wireless communication modes of LTE-TDD/LTE-FDD/GSM/GPRS/EDGE. It supports a maximum 10Mbps downlink rate and a 5Mbps uplink rate It supports a…

    ₹1,425

  • ADIY N58 LTE GNSS Bluetooth Evaluation Board – view 1

    GSM Modules

    ADIY N58 LTE GNSS Bluetooth Evaluation Board

    N58 LTE GNSS Bluetooth Evaluation Board – ADIY NEOWAY N58 is ideal solution for M2M and IoT applications N58 is an industrial LTE module that is developed based on the UNISOC UIS8910DM platform. This module supports…

    ₹2,417

    Datasheet
  • SIMA7670C 4G/LTE GSM Board (LM39302) V1.1 – view 1

    GSM Modules

    SIMA7670C 4G/LTE GSM Board (LM39302) V1.1

    The ADIY SIM A7670xx 4G LTE Board is a Cat-1 Module which supports wireless communication modes of LTE-TDD/LTE-FDD. It supports maximum 10Mbps downlink rate and 5Mbps uplink rate. This board features a serial interface…

    ₹1,447

    Datasheet
  • ADIY 4 Channel ESP32 IOT Relay Module – view 1

    Wireless Modules

    ADIY 4 Channel ESP32 IOT Relay Module

    Welcome to the ADIY IoT Relay Board. This ultra-compact, precision-engineered automation board is powered by the ESP32-WROOM module, combining robust built-in Wi-Fi and Bluetooth with industrial-grade switching…

    ₹1,107