ADIY
ADIY 1 CHANNEL 5V RELAY BOARD WITHOUT OPTO – view 1FIG. 01

Relay Boards

ADIY 1 CHANNEL 5V RELAY BOARD WITHOUT OPTO

Relay Module 5v 1 Channel SPDT (Single-Pole Double-Throw) high-level trigger AC power relay board is designed for easy integration with microcontrollers, allowing direct control of up to 10A at 250 VAC. The relay’s…

₹47₹60incl. GST · price as listed

In stock (as listed)

Overview

Relay Module 5v 1 Channel SPDT (Single-Pole Double-Throw) high-level trigger AC power relay board is designed for easy integration with microcontrollers, allowing direct control of up to 10A at 250 VAC. The relay’s inputs are isolated, ensuring protection for sensitive control circuitry. By default, when the relay is powered off, the COM (Power) is connected to NC (Normally Closed), similar to setting the IN pin to HIGH (+5V). This relay module is compatible with a variety of microcontrollers, including Arduino, AVR, PIC, ARM, and more.

Relay Module 5v 1 Channel is designed for switching only a single high-powered device from your Arduino. It has a relay rated up to 10A per channel at 250VAC or 30VDC. There are two LEDs on the relay module indicating the position of the relay. We have three channels of the relay broken out to screw pin terminals.

Applications: Relay Module 5v 1 Channel#

  • Mains Switching
  • High Current Switching
  • Isolated Power Delivery
  • Home Automation

*Images are representative and may not perfectly match the actual product.

[vc_row][vc_column][vc_column_text css=”” woodmart_inline=”no” text_larger=”no”]Relay Module 5v 1 Channel is designed to switch a single high-powered device using your Arduino or other microcontrollers. This module can handle up to 10A at 250VAC or 30VDC, making it suitable for various applications. It features two LEDs that indicate the relay’s status, and its channels are conveniently labeled: common (COM), normally closed (NC), and normally open (NO), all accessible via screw pin terminals.

On the opposite side of the module, you’ll find three pins: Ground, VCC for power, and an input pin (IN) that controls the relay. The input pin is active low, meaning the relay is activated when the pin is pulled LOW and deactivated when pulled HIGH. This relay module includes additional components to simplify switching and connections, and it provides visual indicators to show whether the module is powered and the relay is active.

Specifications: Relay Module 5v 1 Channel#

  • Supply Voltage :- 3.75 to 6 V
  • Operating Current :- 70mA
  • Relay Maximum Current :- 10A

Features: Relay Module 5v 1 Channel#

  • Supply voltage – 5V
  • Logic Signal voltage – 3.3V or 5V
  • Quiescent current: 2mA
  • Current when the relay is active: ~70mA
  • Relay maximum contact voltage – 250VAC or 30VDC
  • Relay maximum current – 10A.

Applications: Relay Module 5v 1 Channel#

  • Mains Switching
  • High Current Switching
  • Isolated Power Delivery
  • Home Automation

Dimensions: Length*Width*Height(mm) = 18*53*16#

Package Includes: Relay Module 5v 1 Channel – 1 x 5V Relay Module with Single Channel

Resources: Relay Module 5v 1 Channel#

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”18392″ img_size=”full” css=”” parallax_scroll=”no” woodmart_inline=”no”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text css=”” woodmart_inline=”no” text_larger=”no”]

How to use: Relay Module 5v 1 Channel#

Relay modules like this one are commonly used to drive mains loads from a microcontroller like the Arduino or a sensor. In cases like this, the common circuit diagram would be as follows. For simple on/off applications, the relay can be connected as shown above. One terminal of mains is connected to common, and the other is connected to NO or NC depending on whether the load should be connected/ disconnected when the relay is active.

Check out the image below to see how the relay module is connected to a microcontroller and mains source and load. The mains wiring is screwed to the terminal block, and the microcontroller can be connected using jumper cables.

[/vc_column_text][/vc_column][/vc_row]

Features

  • Mains Switching
  • High Current Switching
  • Isolated Power Delivery
  • Home Automation
  • Supply voltage – 5V
  • Logic Signal voltage – 3.3V or 5V
  • Relay maximum contact voltage – 250VAC or 30VDC
  • Relay maximum current – 10A.
  • Usage Guide
  • DataSheet

Technical specifications

Specifications for ADIY 1 CHANNEL 5V RELAY BOARD WITHOUT OPTO
Supply Voltage- 3.75 to 6 V
Operating Current- 70mA
Relay Maximum Current- 10A
Quiescent current2mA
Current when the relay is active~70mA

Specifications are taken from the product listing. See the datasheet for full electrical details.

Datasheets & downloads

  • Relay Boards

    8 Channel Relay Board 12V

    8 Channel Relay Board 12V – This 8 Channel 12V Relay Module with Optocoupler meets the safety standard as control areas and load areas have the isolation groove. Optical coupling isolation module. The triggering of the…

    ₹301.89

  • ADIY 1 CHANNEL 12V RELAY BOARD WITH OPTO – view 1

    Relay Boards

    ADIY 1 CHANNEL 12V RELAY BOARD WITH OPTO

    12V 1-Channel Relay Module with Optocoupler by ADIY is a Bidirectional isolation type 1-Channel relay control module, according to user needs, you can choose a high or low level to control the relay pull. The module…

    ₹61

    Datasheet
  • ADIY 1 CHANNEL 5V RELAY BOARD WITH OPTO – view 1

    Relay Boards

    ADIY 1 CHANNEL 5V RELAY BOARD WITH OPTO

    5 V Relay Module with 1 Channel is designed for switching only a single high-powered device from your Arduino. This 1 channel 5V 10A relay control board module with optocoupler modules is compliant with international…

    ₹61

    Datasheet
  • ADIY 2 CHANNEL 12V RELAY BOARD – view 1

    Relay Boards

    ADIY 2 CHANNEL 12V RELAY BOARD

    2 Channel 12V Relay Module with Optocoupler by ADIY is an interface board and can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on. With digital outputs to control…

    ₹87

    Datasheet