ADIY
MQ4 gas sensor ModuleFIG. 01

Gas Sensors

MQ4 Methane CNG Gas Sensor Module – ADIY

MQ4 methane gas sensor Module is designed to detect methane (CH4) and CNG gas leaks in homes and industries. It provides rapid response and high sensitivity, adjustable via a potentiometer. The sensor outputs an analog…

₹110₹225incl. GST · price as listed

In stock (as listed)

Overview

MQ4 methane gas sensor Module is designed to detect methane (CH4) and CNG gas leaks in homes and industries. It provides rapid response and high sensitivity, adjustable via a potentiometer. The sensor outputs an analog signal proportional to the methane concentration in the air, with detection ranges from 300 ppm to 10,000 ppm. Operating on 5V DC with a power consumption of around 750mW, the MQ4 sensor is ideal for ensuring safety in environments where gas leaks may occur.

Applications: MQ4 sensor Module#

  • This sensor is used in gas leakage detecting devices for homes, industries, offices, etc
  • These sensors detect the methane & natural gases
  • Used in portable gas detectors
  • Industrial Combustible gas detector
  • Gas leak alarm

MQ4 sensor Module is extremely used for detecting gas leakage at home or in industries like Methane (CH4) & CNG Gas. This gas sensor is highly responsive in very little time, so based on the sensitivity requirements; it can be adjusted through a potentiometer. This is an analog output sensor, used like a CNG (compressed natural gas) sensor within the series of MQ sensors. So, this sensor is suitable for detecting the concentration of natural gas like methane within the air. For this sensor, if the gas concentration increases then the output voltage will be increased. This sensor works with 5V DC and draws 750mW around. This article discusses an overview of the MQ4 methane gas sensor and its working with applications. MQ4 methane gas sensor is a MOS (metal oxide semiconductor) type sensor, used to detect the methane gas concentration within the air at either home or industries & generates output like analog voltage by reading it. Here, the range of concentration for sensing ranges from 300 pm – 10,000 ppm which is appropriate for the detection of a leak.

Features: MQ4 sensor Module#

  • Sensitivity is good for combustible gas in an extensive range.
  • Sigh sensitivity for natural gas, methane gas.
  • Small sensitivity for smoke and alcohol.
  • Quick responsive, long life and stable.
  • The drive circuit is simple.
  • Detection gas is methane or natural

Specifications: MQ4 sensor Module#

  • Load resistance: 20KΩ
  • Detecting resistance: 10KΩ to 60KΩ
  • Preheat time: above 24Hrs
  • Required voltage: 5V
  • DO output: 0.1 to 5V
  • AO output: 0.1 to 0.3V
  • Operating temperature: 14 °C to 122 °C

Pin Configuration: MQ4 sensor Module#

  • VCC Pin: This pin provides voltage to the module and the typical operating voltage is +5V.
  • GND Pin: This pin is used to connect the sensor module to the GND terminal of the system.
  • DO (Digital Out) Pin: This pin provides digital output by setting a threshold value with the help of the potentiometer.
  • AO (Analog Out): This pin provides output analog voltage which ranges from 0 to 5V depending on the intensity of gas.

MQ4 gas sensor Module - pin diagram

How it works: MQ4 sensor Module#

MQ4 gas sensor is simply used to detect the gas by using an analog pin or digital pin. Once the sensor module is powered with 5Volts then it starts detecting the methane gas. Once it is detected then the LED will start glowing otherwise the LED will be OFF. Before working with these gas sensors, we have to set aside pre-heating time before you can work with them. Now, bring in the sensor to the methane gas & notice that the voltage throughout the output LED will be high like 5V, so the LED will be turned ON otherwise it will be turned OFF, so the voltage will be low like 0V. Similarly, the analog pin can also be used for detecting methane gas.

Applications: MQ4 sensor Module#

  • This sensor is used in gas leakage detecting devices for homes, industries, offices, etc
  • These sensors detect the methane & natural gases
  • Used in portable gas detectors
  • Industrial Combustible gas detector
  • Gas leak alarm

Package Includes :

1 x MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module

Resources: MQ4 sensor Module#

  1. Usage Guide

Features

  • This sensor is used in gas leakage detecting devices for homes, industries, offices, etc
  • These sensors detect the methane & natural gases
  • Used in portable gas detectors
  • Industrial Combustible gas detector
  • Gas leak alarm
  • Sensitivity is good for combustible gas in an extensive range.
  • Sigh sensitivity for natural gas, methane gas.
  • Small sensitivity for smoke and alcohol.
  • Quick responsive, long life and stable.
  • The drive circuit is simple.
  • Detection gas is methane or natural
  • Usage Guide

Technical specifications

Specifications for MQ4 Methane CNG Gas Sensor Module – ADIY
Load resistance20KΩ
Detecting resistance10KΩ to 60KΩ
Preheat timeabove 24Hrs
Required voltage5V
DO output0.1 to 5V
AO output0.1 to 0.3V
Operating temperature14 °C to 122 °C
VCC PinThis pin provides voltage to the module and the typical operating voltage is +5V.
GND PinThis pin is used to connect the sensor module to the GND terminal of the system.
DO (Digital Out) PinThis pin provides digital output by setting a threshold value with the help of the potentiometer.
AO (Analog Out)This pin provides output analog voltage which ranges from 0 to 5V depending on the intensity of gas.

Specifications are taken from the product listing. See the datasheet for full electrical details.

Pin configuration

MQ4 gas sensor Module - pin diagram

Datasheets & downloads

  • Mq 2 gas sensor

    Gas Sensors

    ADIY MQ2 Gas Sensor Module

    ADIY MQ2 gas sensor is an electronic sensor used for sensing the concentration of gases in air such as LPG, Propane, Methane, Hydrogen, alcohol, smoke, and carbon monoxide. MQ2 gas sensor is also known as chemiresistor.…

    ₹109

    Datasheet
  • MQ135 Gas Sensor Module

    Gas Sensors

    MQ135 Air Quality Sensor Module – ADIY

    MQ-135 Gas sensor can detect gases like Ammonia (NH3), sulfur (S), Benzene (C6H6), CO2, and other harmful gases and smoke. Similar to other MQ series gas sensor, this sensor also has a digital and analog output pin.…

    ₹119

    Datasheet
  • MQ3-GAS-SENSOR-MODULE

    Gas Sensors

    MQ3 Gas Sensor Module – ADIY

    MQ3 Alcohol Sensor Module is made using Alcohol Gas Sensor MQ3. It is a low-cost semiconductor sensor that can detect the presence of alcohol gases at concentrations from 0.05 mg/L to 10 mg/L. The sensitive material…

    ₹125

    Datasheet
  • MQ5-Methane LPG Gas Sensor Module

    Gas Sensors

    MQ5 Gas Sensor Module – ADIY

    ADIY MQ5 gas sensor module is used in gas leakage detection, and suitable for home and industrial equipment for LPG, natural gas, coal gas detection and monitoring. The sensitive material used in the MQ5 gas sensor is…

    ₹110

    Datasheet