ADIY
LM393 – Comparator ModuleFIG. 01

Converter Boards

LM393 Comparator Module – ADIY

The comparator LM393 module is used to digitize any resistive sensor. The module produces an output voltage according to the resistance of the connected sensor and is made available at the Analog Output (AO) pin. The…

₹33₹75incl. GST · price as listed

In stock (as listed)

Overview

The comparator LM393 module is used to digitize any resistive sensor. The module produces an output voltage according to the resistance of the connected sensor and is made available at the Analog Output (AO) pin. The same signal is fed to a LM393 High Precision Comparator to digitize it and is made available at a Digital Output (DO) pin. The module has a built-in potentiometer for sensitivity adjustment of the digital output (DO).

You can set a threshold by using a potentiometer; So that when the sensor resistance goes low beyond the comparator threshold value, the module will output LOW otherwise HIGH.

Apart from this, the module has two LEDs. The Power LED will light up when the module is powered. The Status LED will light up when the digital output goes LOW.

The comparator LM393 module is used to digitize any resistive sensor. The module produces an output voltage according to the resistance of the connected sensor and is made available at the Analog Output (AO) pin. The same signal is fed to a LM393 High Precision Comparator to digitize it and is made available at a Digital Output (DO) pin. The module has a built-in potentiometer for sensitivity adjustment of the digital output (DO).

You can set a threshold by using a potentiometer; So that when the sensor resistance goes low beyond the comparator threshold value, the module will output LOW otherwise HIGH.

Apart from this, the module has two LEDs. The Power LED will light up when the module is powered. The Status LED will light up when the digital output goes LOW.

Features and Specifications#

  • Mounting hole
  • Power and Signal indicator LED’s
  • Analog and Digital Out
  • Adjustable threshold (via potentiometer)
  • Input Voltage (V): 3.3 to 5

Package Includes:#

  • 1 x LM393 Voltage Comparator Module.

Resources#

  1. Usage Guide (Check “The Module” section)
  2. LM393, Dual Comparators datasheet

Features

  • Mounting hole
  • Power and Signal indicator LED’s
  • Analog and Digital Out
  • Adjustable threshold (via potentiometer)
  • 1 x LM393 Voltage Comparator Module.
  • Usage Guide (Check “The Module” section)
  • LM393, Dual Comparators datasheet

Technical specifications

Specifications for LM393 Comparator Module – ADIY
Input Voltage (V)3.3 to 5

Specifications are taken from the product listing. See the datasheet for full electrical details.

Pin configuration

LM393 comparator

Datasheets & downloads

  • 4-channel-I2C-safe-Bi-directional-Logic-Level-Converter-2N7002

    Converter Boards

    ADIY Bi-Directional Logic Level Module

    Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flashcards, and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V…

    ₹26

    Datasheet
  • USB to UART/RS232 Converter – CP2102 – view 1

    Converter Boards

    USB to UART/RS232 Converter – CP2102

    Installs virtual Serial COM Port on your PC through USB so any software can connect to your end device having UART/RS232 port. The UART port is exposed via a 4 pin 0.1″ standard vertical header, and the RS232 port is…

    ₹306