ADIY
ADIY NanoFIG. 01

Arduino Compatible

Nano board by ADIY

The Nano CH340C Soldered Board without USB cable functionality is the same as the UNO. Uses for small projects where you don’t need much of a pin-outs but the small size is very important to make it look good. The Nano…

₹353₹595incl. GST · price as listed

In stock (as listed)

Overview

The Nano CH340C Soldered Board without USB cable functionality is the same as the UNO. Uses for small projects where you don’t need much of a pin-outs but the small size is very important to make it look good. The Nano equips a low-cost USB-Serial Chip that makes it less in price.
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. The Nano can be powered via the mini-USB connection, 5-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected for the highest voltage source

Features: Arduino Nano Compatible Board#

  • Pin to Pin is compatible with Arduino Nano.
  • ADIY Nano is compatible with Arduino IDE software.
  • Manual Reset switch is available.
  • Power, TX, RX LED for indication.

Nano Board by ADIY is fully as compatible as Arduino Nano. It is based on the ATmega328p-AU from Atmel, the SMD version of one used in Arduino Uno. The advantage of this module is that is very small in size as compared to Arduino Uno. It has an integrated USB and is breadboard-friendly. It does not have any power jack but still 9V DC can be provided to Vin pin.

Nano Board by ADIY can be said to be a smaller version of Arduino Uno, as it uses the same MCU with a smaller package. It also provides the same functions as provided by Arduino Uno. Apart from that, it has 8 analog input pins instead of 6 analog inputs in Arduino Uno. It also has a pinout for the programmer to be connected to the board directly, in case USB is not used for programming. It also has 1 x UART, 1 x SPI, and 1 x I2C peripherals.

The ADIY Nano has 2 digital interrupt pins, and almost all pins can be used for pin change interrupt. Any pin can wake up MCU on an interrupt from sleep mode. It works on a 16 MHz frequency.

Features: Arduino Nano Compatible Board#

  • Pin to Pin is compatible with Arduino Nano.
  • ADIY Nano is compatible with Arduino IDE software.
  • Manual Reset switch is available.
  • Power, TX, RX LED for indication.

ADIY Nano: Specifications#

  • Micro controller: ATMega328p-AU
  • Input Voltage: 7 V to 9 V
  • Operating Voltage: 5 V
  • Flash Memory: 32 KB (out of which 2 KB used by bootloader)
  • SRAM: 2 KB
  • EEPROM: 1 KB
  • Clock Speed: 16 Mhz
  • Analog Input Pins: 8
  • Digital I/O pins: 14
  • PWM pins: 6
  • Max Current Per I/O pins: 40 mA
  • Onboard 5V Regulator

Applications of ADIY Nano#

ADIY Nano boards are used to build Arduino Nano projects by reading inputs of a sensor, a button, or a finger and giving an output by turning the motor or LED ON, or some of the applications are listed below.

  • Samples of electronic systems & products
  • Automation
  • Several DIY projects
  • Control Systems
  • Embedded Systems
  • Robotics
  • Instrumentation

Package Includes : 1 x ADIY Nano Board

Warranty: 3Months#

Features

  • Pin to Pin is compatible with Arduino Nano.
  • ADIY Nano is compatible with Arduino IDE software.
  • Manual Reset switch is available.
  • Power, TX, RX LED for indication.
  • Onboard 5V Regulator
  • Samples of electronic systems & products
  • Automation
  • Several DIY projects
  • Control Systems
  • Embedded Systems
  • Robotics
  • Instrumentation

Technical specifications

Specifications for Nano board by ADIY
Micro controllerATMega328p-AU
Input Voltage7 V to 9 V
Operating Voltage5 V
Flash Memory32 KB (out of which 2 KB used by bootloader)
SRAM2 KB
EEPROM1 KB
Clock Speed16 Mhz
Analog Input Pins8
Digital I/O pins14
PWM pins6
Max Current Per I/O pins40 mA

Specifications are taken from the product listing. See the datasheet for full electrical details.

Datasheets & downloads

  • ADIY Uno DIP R3 – Compatible (CH340C) – view 1

    Arduino Compatible

    ADIY Uno DIP R3 – Compatible (CH340C)

    The ADIY Uno R3 CH340C ATmega328P Development Board is the low-cost version of the popular UNO R3 Arduino. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable…

    ₹450

  • ADIY UNO SMD CH340C V1.2 – view 1

    Arduino Compatible

    ADIY UNO SMD CH340C V1.2

    The ADIY Uno SMD ATmega328P Development Board is the low-cost version of the popular UNO R3 Arduino. Instead of ATmega16U2 processor, it is assembled with CH340C V1.2 IC. The ADIY Uno SMD is a microcontroller board…

    ₹270

    Datasheet
  • PROTOTYPING SHIELD FOR UNO – view 1

    Arduino Compatible

    PROTOTYPING SHIELD FOR UNO

    Prototype Shield For UNO is prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 – updated for the most compatibility with just about all the Arduinos! It works…

    ₹97

    Datasheet
  • Uno R3 CP2102

    Arduino Compatible

    Uno R3 – Compatible CP2102

    The ADIY Uno R3 CP2102 ATmega328P Development Board is a cost-effective alternative to the popular Arduino Uno R3. It is designed for beginners and professionals alike, offering robust performance and reliability. Key…

    ₹552

    Datasheet