ADIY
FLY Pico Beginner Kit – ADIY – view 1FIG. 01

Pico RP2040

FLY Pico Beginner Kit – ADIY

The ADIY PICO is a small yet powerful microcontroller board based on the RP2040 chip. It’s designed for learning, experimenting, and building projects — from simple LED blinkers to advanced IoT devices. With multiple…

₹617₹650incl. GST · price as listed

In stock (as listed)

Overview

The ADIY PICO is a small yet powerful microcontroller board based on the RP2040 chip. It’s designed for learning, experimenting, and building projects — from simple LED blinkers to advanced IoT devices. With multiple pins, built-in memory, and USB support, the Pico is the “brain” that will control all the sensors, modules, and displays in your kit. Before you can start coding with the Arduino IDE, read the following instructions below.

SETUP OF ADIY PICO FOR ARDUINO IDE

Here’s the step-by-step guide for installing Raspberry Pi Pico support in the Arduino IDE:

Step 1 – Open Arduino IDE Make sure you are using Arduino IDE 2.x (recommended) or at least

Arduino IDE 1.8.19.

Step 2 – Open Preferences Go to File → Preferences (Windows/Linux) or Arduino IDE → Preferences (Mac). In the window that opens, look for the box “Additional Board Manager URLs”.

Step 3 – Add the Pico Board URL Paste this URL into the box:

https://github.com/earlephilhower/arduino-pico.git

Step 4 – Open Board Manager Go to Tools → Board → Board Manager. In the search bar, type:

rp2040 Find “Raspberry Pi RP2040 Boards (by Earle Philhower) Click Install.

Step 5 – Enter Bootloader Mode & Upload Sketch

Press and hold the BOOTSEL button on your Raspberry Pi Pico, then connect it to your computer using a USB cable. Release the button once a new storage drive (usually named RPI-RP2) appears on your computer. This means the board is now in bootloader mode, ready to receive code. You can now upload your first sketch from the Arduino IDE.

Step 6- Connect your Raspberry Pi Pico via USB: Go to Tools → Board and select: Raspberry Pi Pico.

Step 7 – Select Port: Go to Tools → Port and choose the COM port that shows up when the Pico is connected. On Windows, it appears as “USB Serial Device”. On Mac/Linux, it shows as /dev/tt

Step 8 – Upload a Test Sketch Open File → Examples → Basics → Blink. Click the Upload button. Now your Pico is fully set up for Arduino IDE

Datasheets & downloads

  • RP2040 Pico Expansion Board

    Pico RP2040

    ADIY IO Expansion module for Raspberry Pi Pico

    RP2040 Pico Expansion Board – Enhance Your Pico RP2040 Projects with the Pico RP2040 IO Expansion Shield The RP2040 Pico Expansion Board by ADIY acts as a versatile breakout board for the Pico RP2040, simplifying the…

    ₹202

    Datasheet
  • W5500-EVB-Pico RP2040 Evaluation Board

    Pico RP2040

    ADIY W5500 EVB PICO RP2040 (Type C)

    ADIY Pico RP2040 Evaluation Board with W5500 , a cutting-edge microcontroller evaluation board from ADIY, merges the power of the Raspberry Pi RP2040 with the seamless Ethernet connectivity of the W5500. This innovative…

    ₹788

    Datasheet
  • FLY Pico RP2040 Basic With SD Card Holder (Type C) – view 1

    Pico RP2040

    FLY Pico RP2040 Basic With SD Card Holder (Type C)

    Pico RP2040 Board with SD card – ADIY FLY ADIY FLY is a powerhouse packed with features for professionals. Powered by the advanced RP2040 chip, this board boasts a large on-chip memory, a dual-core processor, and a…

    ₹442

  • RP2040 Pico Board Type C- ADIY FLY

    Pico RP2040

    RP2040 Pico Board Type C- ADIY FLY

    RP2040 Pico Board – Type C ADIY FLY ADIY Fly Type C Pico Board is a powerhouse designed for professional users seeking unparalleled power and flexibility. it comes with a dual-core RP2040 processor and 4MB Flash memory,…

    ₹439

    Datasheet