ADIY
Flame Sensor ModuleFIG. 01

Light Sensors

Flame Sensor Module – ADIY

ADIY Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is…

₹40₹75incl. GST · price as listed

In stock (as listed)

Overview

ADIY Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.

Flame Detection Sensor Module by ADIY is sensitive to the flame but also can detect ordinary light. They are usually used as a flame alarm. Catches a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection point of about 60 degrees, particularly sensitive to the flame spectrum. Sensitivity is adjustable, stable performance.

ADIY Flame Sensor Module is used to detect fire/flame sources or other wavelength light sources in the range of 760nm – 1100 nm. It is based on the YG1006 sensor, a high speed, and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation. The sensor can be a great addition to a firefighting robot, it can be used as a robot’s eye to find the fire source. When the sensor detects flame the Signal LED will light up and the D0 pin goes LOW. The module has 2 outputs: Analog, which gives a real-time voltage output signal on thermal resistance and digital which allows temperature thresholds to be set via a potentiometer.

Flame Sensor Module – ADIY : Specifications#

  • Comparator chip LM393 makes module readings stable.
  • Operating voltage 3.3V-5V.
  • Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
  • Detection range: up to 100 cm.
  • Adjustable detection range.
  • The detection angle is about 60 degrees, it is sensitive to the flame spectrum.

Flame Sensor Module – ADIY : Features#

  • High Photo Sensitivity
  • Fast Response Time
  • Sensitivity adjustable
  • Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
  • Detection range: up to 100 cm.
  • Adjustable detection range.
  • The detection angle is about 60 degrees, it is sensitive to the flame spectrum.
  • Comparator chip LM393 makes module readings stable.
  • Operating voltage 3.3V-5V.
  • Digital and Analog Output.
  • Power indicator and digital switch output indicator.

Flame Sensor Module – ADIY : Package Includes

  • 1 x Flame Sensor Module

Flame Sensor Module – ADIY : Tutorial

Features

  • Comparator chip LM393 makes module readings stable.
  • Operating voltage 3.3V-5V.
  • Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
  • Adjustable detection range.
  • The detection angle is about 60 degrees, it is sensitive to the flame spectrum.
  • High Photo Sensitivity
  • Fast Response Time
  • Sensitivity adjustable
  • Digital and Analog Output.
  • Power indicator and digital switch output indicator.
  • 1 x Flame Sensor Module
  • Arduino Flame Sensor Interface

Technical specifications

Specifications for Flame Sensor Module – ADIY
Detection rangeup to 100 cm.

Specifications are taken from the product listing. See the datasheet for full electrical details.

Pin configuration

Flame sensor Module LM393 Pin diagram

Datasheets & downloads

  • LDR Module

    Light Sensors

    LDR Module – ADIY

    LDR Module – ADIY LDR sensor module is used to detect the intensity of light. It is associated with both the analog output pin and digital output pin labeled as AO and DO respectively on the `board. When there is light,…

    ₹35

    Datasheet